Jeep Gladiator 2020 - Bed Rail Tie down System - if Equipped

154 GETTING TO KNOW YOUR VEHICLE
Wire Color Chart
BED RAIL TIE DOWN SYSTEM — IF EQUIPPED
The Bed Rail Tie Down System allows you to properly secure
cargo in the truck bed.
Circuit Function Fuse Wire Color Locations
Aux Switch 1 F93 – 40 Amp Beige/Pink
Interior (passenger side under instrument panel) &
U
nde
rhood (right side near battery)
Aux Switch 2 F92 – 40 Amp Green/Pink
Interior (passenger side under instrument panel) &
Unde
rhood (right side near battery)
Aux Switch 3 F103 – 15 Amp Orange/Pink
Interior (passenger side under instrument panel) &
Unde
rhood (right side near battery)
Aux Switch 4 F108 – 15 Amp Dark Blue/Pink
Interior (passenger side under instrument panel) &
Unde
rhood (right side near battery)
Battery F72 – 10 Amp Red/White Interior (passenger side under instrument panel)
Ignition F50 – 10 Amp Pink/Orange Interior (passenger side under instrument panel)
CAUTION!
The maximum load per cleat should not exceed 250 lbs
(113
kg) and the angle of the load on each cleat should
not exceed 45 degrees above horizontal, or damage to the
cleat or cleat rail may occur.