STARTING AND OPERATING 377
Off-Road Driving Tips
Side Step Removal — If Equipped
NOTE:
Prior to off-road usage, the side steps should be removed to
preve
nt damage.
1. T
here are two nuts connecting to the body side and one
b
olt
connecting to the underbody on each attachment
bracket. There are four attachment brackets on each side
step.
Fastener Locations (One Side)
2. Remove two nuts and one bolt from the underside of the
vehi
cle for each of the four brackets. Repeat for other side
of vehicle.
Underside Nuts
3. After all bolts and nuts have been removed, pull the side
step
assembly off of the vehicle.
4. To reinstall the side steps align the studs to the body side
hole
s and fasten all nuts on all four brackets. Then secure
all four bolts to the underbody. Repeat the reassembly
procedure for the other side.
5
To Next Page
Loading...
