96 GETTING TO KNOW YOUR VEHICLE
10. Before driving the vehicle with the top in the Sunrider®
position, ensure the top is secured with the provided
hook-and-loop fasteners. For instructions on how to raise
the soft top, refer to “Raising The Soft Top” in this section.
Secured Top In Sunrider® Position
Removing The Soft Top
1. Fully lower the soft top. Refer to “Lowering The Soft Top”
in this section.
2. Using the provided #T50 Tor
x head driver and ratchet,
unscrew the two Torx head fasteners on the inside of each
top mechanism.
Step Two
CAUTION!
Failure to follow the next steps could result in damage to
the s
oft top or vehicle.
To Next Page
Loading...
