GETTING TO KNOW YOUR VEHICLE 95
9. Using the provided #T50 Torx head driver and ratchet,
install and tighten the Torx fasteners by turning them
clockwise. Secure them until they are snug, being careful
not to cross-thread the fasteners or overtighten. Refer to
the following table for recommended torque specifica
-
tions. Repeat on the opposite side.
Step Seven
Soft Top In Place
Torque
S
peci
fication For
Torx Fasteners
Maximum Minimum
119.5 in-lbs 150.5 in-lbs 106.2 in-lbs
13.5 N·m 17.0 N·m 12.0 N·m
CAUTION!
Do not overtighten Torx fasteners. You can strip the
faste
ners if they are overtightened.
2
To Next Page
Loading...
