160 GETTING TO KNOW YOUR VEHICLE
Tonneau Cover Removal
To remove the Tonneau Cover, proceed as follows:
1. Open the tailgate to access the red Tonneau Cover release
straps.
Release Strap Location
2. P
ull one of the red release straps to disengage the rear
locki
ng mechanism.
NOTE:
Pulling either strap will release the latches to roll the
Tonne
au Cover up; there is no need to pull both at the same
time.
3. Roll the Tonneau Cover forward, starting with the rear
bar
and continue to roll toward the front of the truck bed.
Roll Tonneau Cover Forward
CAUTION!
Do not sit on the Tonneau Cover; damage to the cover
a
nd/or
cargo will occur.
To Next Page
Loading...
