GETTING TO KNOW YOUR VEHICLE 159
7. Once the rear Tonneau Cover bar is positioned over the
locking mechanism, grasp the back of the Tonneau Cover
and push downward on the center to engage the locking
mechanisms.
NOTE:
Make sure an audible “click” from both sides of the Tonneau
Cover
are heard to confirm that the latch is completely
engaged.
Push Downward To Lock
NOTE:
If desired, the Tonneau Cover can be left in this position and
the t
ailgate can be raised to the mid-position. Refer to “Tail-
gate” in “Getting To Know Your Vehicle” for further infor-
mation.
Tonneau Cover With Tailgate In Mid-Position
8. T
he tailgate can now be raised and secured in place.
NOTE
:
The Tonneau Cover must be closed completely prior to fully
c
losi
ng the tailgate.
2
To Next Page
Loading...
