GETTING TO KNOW YOUR VEHICLE 129
Cleaning Instructions
During windshield down applications, dust/dirt can accu-
mulate in the cover and block the camera lens. Use a micro-
fiber cloth to clean the camera lens, module, and inside
c
over
, being careful not to damage or scratch the module.
Raising The Windshield
1. Release the strap that secured the windshield in the
lowered position.
2. Raise the windshield.
3. Us
ing the provided #T40 Tor
x head driver, reinstall the
four Torx head fasteners located along the interior of the
windshield. Secure them until they are snug, being
careful not to cross-thread the fasteners or overtighten.
Interior Torx Head Fastener Locations
4. R
einstall the windshield wiper arms using the provided
15 mm
socket. First, align the tips of the blade to the “T”
mark i
n the glass. Then, while holding the arm in that
position, reinstall the hex nut and tighten until snug. Be
careful not to overtighten. Repeat for the other arm.
2
To Next Page
Loading...
