302 STARTING AND OPERATING
FOUR–WHEEL DRIVE OPERATION
Four-Position Transfer Case
Four-Wheel Drive Gear Selector
The transfer case provides four mode positions:
• 2
H (Two-Wheel Drive High Range)
• 4H (
Four-Wheel Drive High Range)
• N (N
eutral)
• 4L (
Four-Wheel Drive Low Range)
For a
dditional information on the appropriate use of each
trans
fer case mode position, see the information below:
2H
Two-Wheel Drive High Range — This range is for normal
stree
t and highway driving on dry, hard surfaced roads.
4H
Four-Wheel Drive High Range — This range maximizes
t
orqu
e to the front driveshaft, forcing the front and rear
wheels to rotate at the same speed. This range provides addi
-
tional traction for loose, slippery road surfaces only.
WARNING!
Failure to engage a transfer case position completely can
cause
transfer case damage or loss of power and vehicle
control. You could have a collision. Do not drive the
vehicle unless the transfer case is fully engaged.
To Next Page
Loading...
