396 IN CASE OF EMERGENCY
Bulb Replacement
NOTE:
Lens fogging can occur under certain atmospheric condi-
tions. This will usually clear as atmospheric conditions occur
t
o a
llow the condensation to change back into a vapor.
Turning the lamps on will usually accelerate the clearing
process.
Halogen Headlamps
NOTE:
We advise referring to an authorized dealer for service.
1. O
pen hood and support using prop rod.
2. R
emove the front grille. Turn the retainers along the top
a quarter turn counterclockwise and remove.
3. Pull the bottom of the grille away, starting at one side and
worki
ng toward the other.
4. Remove the three screws holding the headlamp to the
veh
icle.
5. Remove lamp from the vehicle.
6. R
emove the lamp from the collar.
7. G
rasp the bulb and turn a quarter turn counterclockwise.
8. P
ull the bulb from the housing.
9. P
ush connector locking tab to the unlock position.
10.
Remove connector from bulb.
11.
Push connector onto new bulb base, and push the
con
nector locking tab to the lock position.
12. Reinstall bulb housing. Rotate the bulb a quarter turn
clo
ckwise.
CAUTION!
Do not touch the new bulb with your fingers. Oil
c
onta
mination will severely shorten bulb life. If the bulb
comes in contact with any oily surface, clean the bulb
with rubbing alcohol.
To Next Page
Loading...
