MULTIMEDIA 525
Customer Programmable Features — Uconnect 4
Settings
Uconnect 4 With 7-inch Display Touchscreen And Face-
plate Buttons
Press the Settings button on the bottom bar, or press the
Apps
button, then press the Settings button on the touch-
screen to display the menu setting screen. In this mode, the
U
conn
ect system allows you to access all of the available
programmable features.
NOTE:
• O
nly one touchscreen area may be selected at a time.
• Depe
nding on the vehicles options, feature settings may
vary.
W
hen making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired mode,
p
ress
and release the preferred setting “option” until a check
mark appears next to the setting, showing that setting has
been selected. Once the setting is selected, either press the
Back Arrow button on the touchscreen to return to the
previous menu, or press the X button on the touchscreen to
close out of the settings screen. Pressing the Up or Down
Arrow button on the right side of the screen will allow you
to toggle up or down through the available settings.
The following tables list the settings that may be found
within
the Uconnect 4 with 7-inch display radio, along with
the selectable options pertaining to each setting.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
9
To Next Page
Loading...
