512 MULTIMEDIA
Customer Programmable Features — Uconnect 3
Settings
Uconnect 3 Buttons On The Touchscreen And Buttons On
The Faceplate
Push the Settings button to display the settings menu screen.
In th
is mode, the Uconnect system allows you to access all of
the available programmable features.
NOTE:
Only one touchscreen area may be selected at a time.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired mode,
p
ress
and release the preferred setting and make your selec-
tion. Once the setting is selected, press the Back Arrow/
D
one
button on the touchscreen to return to the previous
menu. Pressing the Up or Down Arrow Buttons on the right
side of the screen will allow you to toggle up or down
through the available settings.
NOTE:
All settings should be changed with the ignition in the ON/
RUN p
osition.
The following tables list the settings that may be found
within
the Uconnect 3 radio, along with the selectable
options pertaining to each setting.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
To Next Page
Loading...
