420 IN CASE OF EMERGENCY
To Stow The Flat Or Spare
1. Turn the wheel so that the valve stem is facing upward
and toward the rear of the vehicle for convenience in
checking the spare tire inflation. Slide the wheel retainer
through the center of the wheel.
2. Lift the spare tire with one hand to give clearance to tilt
the
retainer at the end of the cable and position it properly
across the wheel opening.
Reinstalling The Retainer
3. Attach the lug wrench to the extension tubes with the
curv
ed angle facing away from the vehicle. Insert the
extension tubes through the access hole between the
lower tailgate and the top of the bumper and into the
winch mechanism tube.
WARNING!
A loose tire or jack thrown forward in a collision or hard
stop c
ould endanger the occupants of the vehicle.
Always stow the jack parts and the spare tire in the
places provided. Have the deflated (flat) tire repaired or
replaced immediately.
To Next Page
Loading...
