IN CASE OF EMERGENCY 421
Lug Wrench And Extension Tubes Assembled And
In Position
4. R
otate the lug wrench handle clockwise until the wheel is
d
rawn
into place against the underside of the vehicle.
Continue to rotate until you feel the winch mechanism
slip, or click three or four times. It cannot be overtight
-
ened. Push against the tire several times to ensure it is
f
irml
y in place.
Rotating The Lug Wrench Handle
NOTE:
The winch mechanism is designed for use with the extension
tube
only. Use of an air wrench or other power tools is not
recommended and can damage the winch.
6
To Next Page
Loading...
