GETTING TO KNOW YOUR INSTRUMENT PANEL 191
— Rear Seat Unoccupied Indicator Light — If
Equipped
This light indicates when the rear passenger seats are unoc-
cupied, and will illuminate in the upper right portion of the
i
nstr
ument cluster display, momentarily replacing the
configurable corner information.
Refer to “Occupant Restraint Systems” in “Safety” for
furth
er information.
— Cruise Control Ready Indicator Light — If Equipped
With A Premium Instrument Cluster
This light will turn on when the speed control has been
t
urne
d on, but not set. Refer to “Speed Control” in “Starting
And Operating” for further information.
— Cruise Control SET Indicator Light — If Equipped
With Base Instrument Cluster
This indicator light will illuminate when the speed control is
set.
Re
fer to “Speed Control” in “Starting And Operating” for
furth
er information.
— Selec - Speed Control (SSC) Indicator Light
This light will turn on when Selec - Speed Control is acti-
vated. Selec - Speed Control is available in 4WD Low ONLY.
Refer to Selec - Speed Control (SSC) - If Equipped in “Safety”
f
or f
urther information.
Gray Indicator Lights
— Cruise Control Ready Indicator Light — If Equipped
With Base Instrument Cluster
This light will turn on when the speed control has been
turne
d on, but not set. Refer to “Speed Control” in “Starting
And Operating” for further information.
Blue Indicator Lights
— High Beam Indicator Light
This indicator light will illuminate to indicate that the high
beam
headlights are on. With the low beams activated, push
the multifunction lever forward (toward the front of the
vehicle) to turn on the high beams. Pull the multifunction
lever rearward (toward the rear of the vehicle) to turn off the
high beams. If the high beams are off, pull the lever toward
you for a temporary high beam on, "flash to pass" scenario.
3
To Next Page
Loading...
