88 GETTING TO KNOW YOUR VEHICLE
Removing The Hard Top
1. Remove both front panels. Refer to “Front Panel(s)
Removal” in “Freedom Top Three-Piece Modular Hard
Top — If Equipped” for removal instructions.
2. Open both doors.
3. Us
ing the provided #T50 Tor
x head driver and ratchet,
remove the Torx head fastener that secures the hard top
at the B-pillar (near the top of the front door) on each side.
Torx Head Fastener Location — Left Side Shown
4. I
f equipped, remove the lower interior soft trim panel
atta
ched by the hook-and-loop fastener.
Interior Soft Trim Panel (If Equipped)
5. Remove the two Torx head fasteners that secure the hard
top
to the vehicle (along the interior bodyside rearward of
the back doors) using the #T50
Torx head driver.
To Next Page
Loading...
