GETTING TO KNOW YOUR VEHICLE 97
3. Utilizing two people, lift the soft top up and away from
the vehicle, careful to avoid the vehicle’s sport bar and
trim. Store the soft top in a safe, clean, and dry location.
4. Remove the door frames. The rear door frames must be
remo
ved before the front door frames. Refer to “Door
Frame Removal” in “Getting To Know Your Vehicle” for
removal instructions.
5. Using the provided #T50 Tor
x head driver and ratchet,
unscrew the six Torx head fasteners on both rear corners
and the back of the cab, then remove the belt rail.
NOTE:
Folding down the rear seats is recommended to provide
e
asie
r access to the fasteners.
Belt Rail Fasteners
1 — Rear Fasteners
2 — Corner Fasteners
2
To Next Page
Loading...
