GETTING TO KNOW YOUR VEHICLE 153
NOTE:
Holding last state conditions are met when switch type is set
to la
tching and power source is set to ignition.
For more information, refer to “Uconnect Settings” in
“Mult
imedia”.
The auxiliary switches manage the relays that power four
b
l
unt
cut wires. These wires are located under the instru-
ment panel in the passenger compartment and under the
h
ood
to the right, near the battery.
Auxiliary Switch Connections — Under Hood
Auxiliary Switch Connections – Under Instrument Panel
In addition to the four auxiliary switch wires, a fused battery
wire a
nd ignition wire are also located in the interior, on the
passenger side under the instrument panel.
A kit of splices and heat shrink tubing are provided with the
auxil
iary switches to aid in the connection/installation of
your electrical devices.
2
To Next Page
Loading...
