GETTING TO KNOW YOUR VEHICLE 107
2. Once all the way loosened, remove the Torx head
fasteners by pulling downward.
NOTE:
The fasteners will not fall out once completely loose, as they
are h
eld in place by an internal mechanism.
Remove Fasteners From Below Frame
3. Lift the frame upward, removing it from the vehicle.
Step
Three
4. Store the fasteners in a secure location.
5. Re
peat the procedure on the front door frame.
WARNING!
Do not drive your vehicle on public roads with the door
and/or
door frame(s) removed as you will lose the
protection that they can provide. This procedure is
furnished for use during off-road operation only.
2
To Next Page
Loading...
