174 GETTING TO KNOW YOUR INSTRUMENT PANEL
Stop/Start — If Equipped
Push and release the up or
down arrow button until the
Stop/Start icon/title is highlighted in the instrument cluster
display. The screen will display the Stop/Start status.
Audio
Push and release the up or
down arrow button until the
Stop/Start icon/title is highlighted in the instrument cluster
display. The screen will display the Stop/Start status.
Phone Call Status
When a call is incoming, a Phone Call Status pop-up will
disp
lay on the screen. The pop-up will remain until the
phone is answered or ignored.
NOTE:
The call status will temporarily replace the previous media
sour
ce information displayed on the screen. When the
pop-up is no longer displayed, the display will return to the
last used screen.
Stored Messages
Push and release the up or
down arrow button until the
Messages Menu item is highlighted. This feature shows the
number of stored warning messages. Pushing the right
arrow button will allow you to see what the stored messages
are.
When no messages are present, main menu icon will be a
clos
ed envelope, and “No Stored Messages” will display.
Screen Setup
NOTE:
The Screen Setup feature can only be used while the vehicle
i
s n
ot in motion.
Push and release the up or
down arrow button until the
Screen Setup Menu Icon/Title is highlighted in the instru-
ment cluster display. Push and release the O
K bu
tton to
enter the sub-menus and follow the prompts on the screen as
needed. The Screen Setup feature allows you to change what
information is displayed in the instrument cluster as well as
the location in which that information is displayed.
To Next Page
Loading...
