SAFETY 233
Lap/Shoulder Belt Operating Instructions
1. Enter the vehicle and close the door. Sit back and adjust
the
seat.
2. T
he seat belt latch plate is above the back of the front seat,
a
nd
next to your arm in the rear seat (for vehicles
equipped with a rear seat). Grasp the latch plate and pull
out the seat belt. Slide the latch plate up the webbing as
far as necessary to allow the seat belt to go around your
lap.
Pulling Out The Latch Plate
3. W
hen the seat belt is long enough to fit, insert the latch
plat
e into the buckle until you hear a “click.”
Inserting Latch Plate Into Buckle
4
To Next Page
Loading...
