SAFETY 239
Stow Clips Behind Rear Seat
Your vehicle is equipped with a stow clip on the lower trim
next
to each of the rear seats. This clip is used to hold the seat
belt out of the path of the seatback when it is being folded
and opened. Only place the seat belt webbing in this clip
while folding and opening the seat. Do not leave the
webbing behind the clip when using the belt to restrain an
occupant.
Rear Stow Clip
WARNING!
• The seat belt assembly must be replaced if the switch-
able
Automatic Locking Retractor (ALR) feature or any
other
seat belt function is not working properly when
checked according to the procedures in the Service
Manual.
• Failure to replace the seat belt assembly could increase
the
risk of injury in collisions.
• Do not use the Automatic Locking Mode to restrain
occup
ants who are wearing the seat belt or children
who are using booster seats. The locked mode is only
used to install rear-facing or forward-facing child
restraints that have a harness for restraining the child.
WARNING!
Do not place the seat belt webbing behind the rear seat
stow c
lip when using the seat belt to restrain an
occupant. The seat belt will not be positioned properly
on the occupant and they could be more seriously
injured in an accident as a result.
4
To Next Page
Loading...
