Jeep Gladiator 2020 - Page 342

340 STARTING AND OPERATING
To Vary The Speed Setting
To Increase Speed
When the Normal (Fixed Speed) Cruise Control is set, you
can
increase speed by pushing the SET (+) button.
The driver's preferred units can be selected through the
inst
rument cluster display. Refer to “Getting To Know Your
Instrument Panel” for more information. The speed incre
-
ment shown is dependant on the speed of U.S. (mph) or
Metr
ic (km/h) units:
U.S. Speed (mph)
• P
ushing the SET (+) b
utton once will result in a 1 mph
increase in set speed. Each subsequent tap of the button
results in an increase of 1
mph.
• If the button is continually pushed, the set speed will
con
tinue to increase in 5 mph increments until the button
is r
eleased. The increase in set speed is reflected in the
instrument cluster display.
Metric Speed (km/h)
• Pushing the SET (+) b
utton once will result in a 1 km/h
increase in set speed. Each subsequent tap of the button
results in an increase of 1
km/h.
• If the button is continually pushed, the set speed will
con
tinue to increase in 10 km/h increments until the
butt
on is released. The increase in set speed is reflected in
the instrument cluster display.
To Decrease Speed
When the Normal (Fixed Speed) Cruise Control is set, you
can
decrease speed by pushing the SET (-) button.
The driver's preferred units can be selected through the
inst
rument cluster display. Refer to “Getting To Know Your
Instrument Panel” for more information. The speed decre
-
ment shown is dependant on the speed of U.S. (mph) or
Metr
ic (km/h) units:
U.S. Speed (mph)
• P
ushing the SET (-)
button once will result in a 1 mph
decrease in set speed. Each subsequent tap of the button
results in a decrease of 1
mph.
• If the button is continually pushed, the set speed will
con
tinue to decrease in 5 mph decrements until the button
is r
eleased. The decrease in set speed is reflected in the
instrument cluster display.