IN CASE OF EMERGENCY 411
There are two ways to assemble the tools:
Assembled For Spare Tire Lowering/Raising
NOTE:
If the tailgate is lowered, the jack extension with hook can be
a
dded
to this assembly to enable lowering of the spare tire
without having to raise the tailgate.
Assembled For Jack Operation
1 — Lug Wrench
2 — Long Extension Without Spring Clip 2
3 — Long Extension With Spring Clip 3
4 — Long Extension With Spring Clip 4
CAUTION!
• The lug wrench can only be attached to extension 2.
• When
attaching the tool to the winch mechanism be sure
the
large flared end opening on extension 4 is positioned
correctly over the winch mechanism adjusting nut.
• Damage to the lug wrench, extensions and winch mech-
anis
m may occur from improper tool assembly
1 — Lug Wrench
2 — Long Extension 2
3 — Long Extension 3
4 — Long Extension 4
5 — Short Extension With Hook
6
To Next Page
Loading...
