508 TECHNICAL SPECIFICATIONS
(Continued)
Engine Oil Filter
We recommend you use Mopar Engine Oil Filter or
equi
valent.
Spark Plugs We recommend you use Mopar Spark Plugs.
Fuel Selection — 3.6L Engine 87 Octane (R+M)/2 Method, 0-15% Ethanol.
Component Fluid, Lubricant, or Genuine Part
CAUTION!
• Mixing of engine coolant (antifreeze) other than speci-
fie
d Organic Additive Technology (OAT) engine
coolan
t (antifreeze), may result in engine damage and
may decrease corrosion protection. Organic Additive
Technology (OAT) engine coolant is different and
should not be mixed with Hybrid Organic Additive
Technology (HOAT) engine coolant (antifreeze) or any
“globally compatible” coolant (antifreeze). If a
non-OAT engine coolant (antifreeze) is introduced into
the cooling system in an emergency, the cooling system
will need to be drained, flushed, and refilled with fresh
OAT coolant (conforming to MS.90032), by an autho
-
rized dealer as soon as possible.
• Do not use water alone or alcohol-based engine coolant
(antifreeze) products. Do not use additional rust inhib
-
itors or antirust products, as they may not be compat-
ible with the radiator engine coolant and may plug the
r
adi
ator.
• This vehicle has not been designed for use with
prop
ylene glycol-based engine coolant (antifreeze).
Use of propylene glycol-based engine coolant (anti
-
freeze) is not recommended.
CAUTION! (Continued)
To Next Page
Loading...
