54 GETTING TO KNOW YOUR VEHICLE
Rear Seat Folded Flat
To raise the seatback to the proper position, manually lift the
seatb
ack until it locks into place. To return the head restraint
to the proper position, manually lift up until it locks into
place. If interference from the cargo area behind the seat
prevents the seatback from fully locking, you will have diffi
-
culty returning the seats to their proper position.
NOTE:
• T
he vehicle is equipped with stow clips located on the
lower
trim, next to the rear seats. Use these clips to hold the
seat belt out of the path of the seat back when it is being
folded and raised.
• You may experience deformation in the seat cushion from
the
seat belt buckles if the seats are left folded for an
extended period of time. This is normal. By simply
opening the seats to the open position, the seat cushion
will return to its normal shape over time.
WARNING!
Be certain that the seatback is securely locked into
positi
on. Perform a “push - pull - push” check to confirm
the seat is fully locked. If the seatback is not securely
locked into position, the seat will not provide the proper
stability for child seats and/or passengers. A red
indicator on the pull strap will be displayed if the
seatback is not securely locked. An improperly latched
seat could cause serious injury.
To Next Page
Loading...
