606 MULTIMEDIA
Pair A Bluetooth® Streaming Audio Device
1. Press the Media button on the touchscreen to begin.
2. C
hange the Source to Bluetooth®.
3. P
ress the Bluetooth® button on the touchscreen to
dis
play the Paired Audio Devices screen.
4. Press the Add Device button on the touchscreen.
NOT
E:
If there is no device currently connected with the system, a
p
op-
up will appear.
5. Search for available devices on your Bluetooth®-enabled
aud
io device. When prompted on the device, enter the
PIN shown on the Uconnect screen.
6. Uconnect Phone will display an in process screen while
the
system is connecting.
7. When the pairing process has successfully completed, the
syst
em will prompt you to choose whether or not this is
your favorite device. Selecting “Yes” will make this
device the highest priority. This device will take prece
-
dence over other paired devices within range.
NOTE:
For devices which are not made a favorite, the device priority
i
s d
etermined by the order in which it was paired. The latest
device paired will have the higher priority.
You can also use a following VR command to bring up a list
of p
aired audio devices:
• “Show Paired Phones” or
• “Co
nnect My Phone”
Conn
ecting To A Particular Mobile Phone Or Audio
Devic
e After Pairing
Uconnect Phone will automatically connect to the highest
prio
rity paired phone and/or Audio Device within range. If
you need to choose a particular phone or Audio Device
follow these steps:
1. Press the Phone Settings button on the touchscreen.
2. P
ress the Paired Phones or Paired Audio Sources button
on
the touchscreen.
3. Press to select the particular Phone or the particular
Aud
io Device. A pop-up menu will appear, press
“Connect Phone”.
4. Press the X button to exit out of the Settings screen.
To Next Page
Loading...
