GETTING TO KNOW YOUR VEHICLE 73
Manual Climate Control Descriptions
Icon Description
A/C Button — If Equipped
Push the A/C button to engage the Air Conditioning. An LED illuminates when the A/C system is
engaged
.
MAX A/C Setting — If Equipped
Turn the temperature control knob to the MAX A/C (Air Conditioning) position to engage the coldest
t
empe
rature setting.
Recirculation Button
Press and release this button on the touchscreen, or push the button on the faceplate, to change the
s
ystem
between recirculation mode and outside air mode. Recirculation can be used when outside
conditions such as smoke, odors, dust, or high humidity are present. Recirculation can be used in all
modes except for Defrost. Recirculation may be unavailable if conditions exist that could create
fogging on the inside of the windshield.The A/C can be deselected manually without disturbing the
mode control selection. Continuous use of the Recirculation mode may make the inside air stuffy and
window fogging may occur. Extended use of this mode is not recommended.
Rear Defrost Button
Push and release the Rear Defrost button to turn on the rear window defroster and the heated outside
mirro
rs (if equipped). An indicator will illuminate when the rear window defroster is on. The rear
window defroster automatically turns off after ten minutes.
Temperature Control
Use this control to regulate the temperature of the air inside the passenger compartment. Rotating the
knob c
ounterclockwise, from top center into the blue area of the scale, indicates cooler temperatures.
Rotating the knob clockwise, into the red area, indicates warmer temperatures.
2
To Next Page
Loading...
