78 GETTING TO KNOW YOUR VEHICLE
Automatic Climate Control Descriptions
Icon Description
MAX A/C Button
Press to change to the coldest setting, the indicator illuminates when MAX A/C is on. Pressing the
butto
n again causes the MAX A/C operation to switch into manual mode and the MAX A/C indicator
turns off.
NOTE:
The MAX A/C button is only available on the touchscreen.
A/C Button
Press and release to change the current setting. The indicator illuminates when A/C is on.
Recirculation Button
Press and release this button on the touchscreen, or push the button on the faceplate, to change the
s
ystem
between recirculation mode and outside air mode. Recirculation can be used when outside
conditions, such as smoke, odors, dust, or high humidity are present. Recirculation can be used in all
modes. Recirculation may be unavailable (button on the touchscreen greyed out) if conditions exist
that could create fogging on the inside of the windshield. The A/C can be deselected manually
without disturbing the mode control selection. Continuous use of the Recirculation mode may make
the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended.
AUTO Button
Automatically controls the interior cabin temperature by adjusting airflow distribution and amount.
Togglin
g this button causes the system to switch between manual mode and automatic modes.
Refer to “Automatic Operation” within this section for more information.
To Next Page
Loading...
