90 GETTING TO KNOW YOUR VEHICLE
(Continued)
8. To release the wire harness, pull back on the red latch,
then push down on the black button while pulling the
harness out.
Pull Back On Red Latch
Push Black Button To Release
9. R
emove the hard top from the vehicle. Install edge
prot
ectors and place the hard top on a soft surface to
prevent damage.
CAUTION!
• The front panel(s) must be positioned properly to
ensu
re sealing. Improper installation can cause water to
leak into the vehicle's interior.
• The hard top assembly must be positioned properly to
ensu
re sealing. Improper installation can cause water to
leak into the vehicle's interior.
To Next Page
Loading...
