computer radio control system
EN
4. 4.
PPM input
The transmitter can handle up to 8 channels of the PPM input signal
(please refer to the chapter 3.7 PPM Input/Output Connector). The
signal should be present on the pin No. 1. To prevent any damage,
you need to use the 3V logic level and protective elements on the
input.Throughout the model settings you can assign any of the PPM
channels to any function of the transmitter. The PPM input is not
linked with the trainer system in any way and works separately. It is
possible to use the PPM input in cooperation with head-tracking
systems etc.
138
To Next Page
Loading...
