Configuration DVR Integration Option
2-4 24-10515-13 Rev. –
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
The installation and operation of the DVR equipment must be done in
accordance with the manufacturer's instructions.
The DVR Equipment must be time-synchronized with the P2000 server.
!
CAUTION
In addition to the above notes, some protocols require additional steps or
particular configuration settings. Chapter 4: Protocol Integration contains
some of that information, as available at the time of this publication. It is
recommended that you refer to the DVR’s manufacturer for further
documentation and guidance on protocol-specific settings.
CCTV Server
The CCTV Server must be configured to establish communication and control.
T
o add and configure a CCTV Server for DVR:
1. Open the CCTV/AV Configuration window.
2. In the CCTV/AV Configuration window, right-click the icon for the CCTV
Server and click Ad
d.
3. In the Edit Server window, fill in the information for each field according to
the “Edit Server Field Definitions” below.
4. Click OK to save the new information.
To Next Page
Loading...
