Figure 4-2: Time Source Configuration
Protocol Integration DVR Integration Option
4-20 24-10515-13 Rev. –
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
Known Issues
When a recorder fails to get actual playback time from its index, Nice video
retrieval can take 20-30 seconds.
Changing the video recording quality works correctly on bit rate change, but
not on frame rate change. As a workaround, it is recommended that you
configure the Nice recorder with pre-configured recording parameters, and
then change configuration rather than change recording quality directly.
Time Synchronization
All Nice recorders must synchronize time with the P2000 server. However, they
cannot become P2000 clients directly. Instead, you need to configure the Nice AMS
server as a client of the P2000 server. Then, you must synchronize Nice recorders
with the Nice AMS server. The recommended configuration is illustrated in
Figure 4-2.
P2000 SERVER
Time source
NICE RECORDER #1
Time sync client of
Nice AMS server
NICE RECORDER #2
Time sync client of
Nice AMS server
NICE RECORDER n
Time sync client of
Nice AMS server
NICE AMS SERVER
Time sync client of P2000 server
and time sync source for all Nice
recorders
...
PANASONIC ND300 AND ND300A
The P2000 server account must be a level 1 account. The P2000 workstation
accounts must be level 2, 3, or 4.
On the Panasonic DVR, the user logged in with the
highest account level has control
over the DVR functions. These functions will be disabled for the users with lower
account levels.
To Next Page
Loading...
Need help?
General
