Johnson Controls P2000 User Manual

DVR Integration Option Protocol Integration
24-10515-13 Rev. – 4-11
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
MILESTONE
The P2000 Milestone integration allows P2000 to control operation of the Milestone DVR
based on events that occur in the P2000 system. It also allows both live and stored video
from the Milestone system to be displayed on the P2000 workstations.
User-defined name for a camera (see page 2-17) connected to the Milestone DVR must
match the name of the camera in the Milestone system.
Preset names (see page 2-20) as defined in the P2000 system must match the preset names as
defined in the Milestone system.
Instead of the AV Player, Milestone DVR uses the Milestone Viewer application.
Configuring Camera for Motion Alarm
After configuring a camera for motion alarm, in addition to restarting the P2000 AV
Service you must also restart the P2000 Milestone Interface Service.
Milestone Viewer
The Milestone Viewer application allows you to perform the following functions:
 View live video
 Control PTZ functions of cameras connected to Milestone DVR
 Search for and play recorded video
The Milestone Viewer consists of the video player viewing area and tabs to access
live or recorded video.
The Milestone Viewer window title displays the name of the currently selected
camera. This information is repeated in the text above the viewing area, along with
camera status information.

Johnson Controls P2000 Specifications

General

Brand	Johnson Controls
Model	P2000
Category	Security System
Language	English