Johnson Controls P2000 User Manual

DVR Integration Option Protocol Integration
24-10515-13 Rev. – 4-17
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
When configuring the AV switch settings under the Audio Visual tab (see
page 2-10) follow these requirements:
 Streaming Server IP Address - Enter the IP Address of the Recorder Server
(the IP address of the DVR recorder)
 Data Server IP Address - Enter the IP Address of the Application Server
 Storage Server IP Address - Enter the IP Address of the Recorder Server
 Authentication (Username, Password, Confirm password) - User
authentication information is not required by the Nice DVR, but is required
by P2000, therefore these fields cannot be left blank. Enter any user
authentication information values allowed by the P2000.
 Matrix Switch (Server Name, IP Address, Port) - Use the default settings.
The Server Name field should be left blank.
Configuring Cameras
When configuring the camera settings, for the OPC Name (see page 2-17) enter the
index number that Nice uses to store the camera information in its database
definition.
This number is not available through the Nice Site Builder. The camera index
number can be determined as follows: the first camera added to the Nice DVR
becomes “1,” the second camera becomes “2,” and so on. If a camera is deleted and
re-added, its index number will change. It will be assigned the next available
number in the index. The camera’s former number will remain unused.
Configuring Presets
When configuring the preset settings, for the OPC Name (see page 2-20) enter the
index number that Nice uses to store the preset information in its database definition.
This number is not available through the Nice Site Builder. The preset index number
can be determined as follows: the first preset added to the Nice DVR becomes “1,”
the second preset becomes “2,” and so on. If a preset is deleted and re-added, its
index number will change. It will be assigned the next available number in the
index. The preset’s former number will remain unused.
NOTE
To obtain the Nice index numbers for cameras and presets contact
the Nice system administrator.
Troubleshooting Nice 9.0 DVR
This section describes common problems when using the Nice 9.0 protocol. In
addition, see
page 4-19 for details on Nice protocol-related limitations and setup
requirements.

Johnson Controls P2000 Specifications

General

Brand	Johnson Controls
Model	P2000
Category	Security System
Language	English