Johnson Controls P2000 User Manual

Protocol Integration DVR Integration Option
4-6 24-10515-13 Rev. –
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
The following illustration shows an example of correctly defined custom
Logical ID.
Alarm Management is selected
Notice the following:
 The required DWORD Value name to define
custom Logical ID for Dry Contact alarm type is
“TamperingAlarm.”
 The Genetec Logical ID matches the Value
data for this alarm type as defined in the
computer registry on the P2000 server.
Creating Custom Logical IDs
!
CAUTION
Procedures described in this section change the default settings
through modifications to the registry and should only be performed by
qualified professionals. In most cases the default settings are sufficient
and the procedures listed below do not need to be performed.
 To create custom Logical ID:
1. Launch r
egedt32.exe to access and edit the registry.
2. Expand the tree and go to: HKEY
_LOCAL_MACHINE>Software>
Johnson Controls>A
V Vendor>Genetec.
3. To create a registry new entry
, from the main menu go to
Edit>New>DWORD Value. The new registry entry appears in the right
window pane. Type in the entry name and press the Enter key (see Table 4-2
for reference).

Johnson Controls P2000 Specifications

General

Brand	Johnson Controls
Model	P2000
Category	Security System
Language	English