Johnson Controls P2000 User Manual

Protocol Integration DVR Integration Option
4-16 24-10515-13 Rev. –
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
NICE
For Nice protocol the authentication user name is Administrator, and the case-sensitive
authentication password is NICE.
Currently, Nice protocol version 9.0 can process 1 alarm per 2 seconds.
NiceVision Integration with P2000
For installation and configuration process follow this outline:
1. Install the P2000 server software with the Nice protocol.
For instructions on P2000 software installation refer to the P2000
Server/Workstation Software Installation Manual.
2. Install the following Nice software:
 Nice DVR
 AMS Server
 Database
 ICM Server
For instructions, refer to the manufacturer’s documentation.
3. Configure the Nice DVR and Cameras using the NiceVision SiteBuilder
application. For instructions refer to the manufacturer’s documentation.
NOTE
When using NiceVision 9.0, PTZ cameras must be connected to the first
available channel on the Nice DVR (does not apply to NiceVision
10.5).
For example, for a site that has five PTZ cameras and three non-PTZ
cameras, you must connect the PTZ cameras to channels 1 to 5, and the
non-PTZ cameras to channels 6 to 8.
4. Configure the AV Switch using the P2000 application.
Configuration Guidelines for Nice v10.5 and v10.7
Configuring AV Switch
The Nice DVR system usually consists of the Application Server (AMS), Recorder
Server, and PTZ Controller. For the P2000, only the Application Server and
Recorder Server IP addresses are required.

Johnson Controls P2000 Specifications

General

Brand	Johnson Controls
Model	P2000
Category	Security System
Language	English