JR ProPo XG8 - Function List: SNAP ROLL; SNAP ROLL (SNAP ROLL) Settings

32
FLAPSYSTEM
EachFunctionintheFunctionList
FunctionExplanation
Theflapscanbecontrolledinthreestagesusingtheswitches.(Delayispossible.)Additionally,thereisafunc-
tionthatcarriesoutmixingtotheelevators.ThereisalsoanAutoThrottlefunctionthatautomaticallylowers
theflapswhenthethrottlestickislowered.
Further,aileronaxiscorrectionisalsopossiblewhentheflapshavebeengreatlyloweredwhileusingthe
flaperons.
Inthisscreen,iftheflapchanneloutputhasnotbeensetto“SYS”inDeviceSelect,thechannelswillbe
displayedasbeingunusable.
•
SettingMethod
Thisscreenhasthreepages.Rotatethedialtoselecttheitemsthatcanbeset,thenpressthedialto
displaythesettingbox.
【FLAPSYS.】
●Page1
Thiscarriesouttheflapsettingsandthesettingofcorrectionstotheelevators.
●Page2
Thiscarriesoutthecorrectionsettingtotheailerons.
Airplane
●Page3
ThiscarriesoutallocationtotheFlightModeandAutoThrottlesettingung.
Actuallyoperatetheservosandcarefullyconfirmthesettingsbeforeflying.
CautionItem
TheTrimInputswitchescanbeused.
MovementDelayTime
Setting
Settingofthemixing
amountsofeachposition
totheelevators.
ServoPositionin
EachFlapPosition
Thissetsthemixing
amountsforeach
positiontotheailerons.
MovementDelayTime
Setting
TheTrimInputswitchescanbeused.
AutoThrottlePositionSetting
Thissetstheflap
positionsforeach
FlightMode.