JR ProPo XG8 - 72_WING TYPE1 e

71
WINGTYPE
FunctionExplanation
Thiscarriesoutsettingscorrespondingtotheaircraftwingtype.Itsetsdualailerons,dualflaps,
dualelevators,dualrudders,taillessplanes,andV-tailwings.
•
DualAileronsandDualFlapsareincorporated.
TheaileronDualTrimissettotheRightTrim,whiletheFlapAuxiliary
TrimissettotheLeftTrim.
ThetailisaV-tail.
•
Flaperonsareincorporatedinwhichtheaileronsarecapableofflap
operation,whiletheDualElevatoroutputissettoAUX2andtheDual
RudderissettoAUX3.TheelevatorAuxiliaryTrimissettotheLeftTrim,
whiletheRudderAuxiliaryTrimissettotheRightTrim.
Thetailisanormalspecification.
•
DualAileronsareincorporatedandtheoutputissettoAUX2.TheDual
ElevatoroutputissettotheRightTrimasAuxiliaryTrimusingGEAR.The
wingrootbaseflapsarealsodualincorporation,andtheAuxiliaryTrimis
settotheLeftTrim.
Thetailisanormalspecification.
•
SettingMethod
SettingExamples
TheSettingscreenisseparatedintotheupperpartforselectingthewingtype,andthelower
partforthedualsettingsofeachcontrolsurface.
•
Becausethisreceiverhas8channels,dependingonthesettingsthenumberofauxiliarychannelswillbe
limited.Inthefollowingscreen,theremainingchannelboxeswillbeautomaticallydisplayed.Inthesitua-
tionwheretherearenochannelsremainingforallocation,the“----”displaywillbeshown.
InthesituationoftheGlidertype,theflaperonswillbesetasstandard.
Actuallymovetheservosandcarefullyconfirmthesettingsbeforeflying.
Forthesettingsinthisfunction,confirmusingtheServoMonitorScreenorbyactuallymoving
theservos.
•
•
● ScreenforAirplanes
CautionItems
Hints
TakingDualElevatorsasanexample,inElevatorTrimtheupanddownmovementofeachcontrolsurface
canbemovedsimultaneously.However,whenthetrimsareincreased,theywillhaveaneffectasatrimin
theoppositedirection.
Thisfunctionprovidesaconvenienttrimforcarryingoutsimplecorrectioninresponsetothedisplacement
oflinkagesandtwistingofcontrolsurfaces.
•
Hint
【WINGTYPE】
WhatisDualTrim?
EachFunctionintheSystemList
Airplane
Glider
WingTypeSettings
V-TailSelection
Thisselectswhichchannelthedualcontrolsurfaceangleswillbeoutputto.
Displayedas(MATECH).
DualTrimSetting