JR ProPo XG8 - 74_BAINDe

73
BINDING&RANGECHECKING
EachFunctionintheSystemList
FunctionExplanation
Thisfunctioncarriesoutbinding(pairing)withthereceiver.Inaddition,thefunctioncanreduce
theoutputforcarryingoutrangechecking.
SettingMethod
SetthereceivertotheBindingStandbycondition.Thenrotatethedialtoselect“BIND”
(inversedisplay)andpressthedial.Sometimewillberequiredforthebindingtobecarried
out.Aftercompletionofthebindingtheservoswillbegintomove.
IntheRangeCheckingmode,keepingadistanceapproximately40mfromthe
aircraft,confirmthatthetransmitteroperatestheaircraftnormallyfromeach
direction.
Bindingshouldbecarriedoutinalocationwheretherearenoother2.4GHz
radiowaves,andthereceivershouldbekeptwithin1m.
・Whenthemodelortypeischangedusingthetransmitter,re-bindingwillbe
necessary.
・AbsolutelydonotflytheaircraftinRangeCheckingmode.
CautionItems
Hints
●Binding
【BIND＆RANGE】
●RangeChecking
Bindingiscarriedouthere.
IfPOWERischangedfrom“NORMAL”to“LOW”,theoutputwillbereducedandtheLED
willflash,allowingrangecheckingtobecarriedout.Whenthisscreenisexited,the
outputwillreturntonormal.
●RegionalSettings
WhenusingthetransmitterinFranceanditsoverseasterritories,thisshouldbeset
to“FRANCE”.Inallotherregionsthisshouldbesetto“GENERAL”.IntheFrance
mode,the2.4Gbandwidththatisusedwillbelegallyrestrictedcomparedtothe
bandwidthinotherregions.
•
•
•
•
•
•
Helicopter
Airplane
Glider
RegionalSettings
RangeCheck