JR ProPo XG8 - 37_RUDD-AIE_ELEV

36
RUDDER→AILERON/ELEVATOR
EachFunctionintheFunctionList
FunctionExplanation
SettingMethod
【RUDD→A/E】
●Page1
Thisfunctionmixestherudderoperationtotheaileronsandelevators.Thisisconvenientfor
removingbiasesinknife-edgeflying.Inaddition,aTrimInputswitchthatisconvenientfor
makingadjustmentsduringflightcanalsobeused.
Themixingamountsfromtheruddercanbesetseparatelyintheupanddowndirections.In
addition,theswitchforswitchingthisfunctionON/OFFwillbeinitiallysettoMIX-SW.Inthe
situationwherethisistobechanged,thisshouldbecarriedoutusing“SWSEL”.Forallofthe
items,rotatethedialtoselecttheitemthatcanbeset,thenpressthedialtodisplaytheset-
tingbox.
Airplane
Actuallyoperatetheservosandcarefullyconfirmthesettingsbeforeflying.
CautionItems
OperationCondition
Thissetsthemixingamounttoeach
controlsurface.
TotheSwitch
ChangingScreen
●Page2
ThisselectstheTrimInputswitch.
OperationCondition
TheTrimInputSwitchscreenwillbedisplayed.