Chapter 2 OPERATIONS
2.9 RADAR ECHO SETTINGS
2-76
2.9 RADAR ECHO SETTINGS
This function enables the setting of detail information about radar echo.
"RADAR Echo" operations
1 Open RADAR Echo from the Main Menu.
"RADAR Echo" menu appears.
Detail information about radar signal processing can be set by changing the settings
of the menu items.
Reference:
After the settings for radar signal processing are changed, small targets may not be
displayed or unwanted waves may not be suppressed. Thus, do not make a significant
change in the settings.
2.9.1 SETTING RADAR INTERFERENCE REJECTION
Setting Radar Interference Rejection
Use this function to eliminate interference waves from other radars.
1 Open RADAR Echo - IR .
"IR" menu appears.
Off : Interference rejecter off
Low : Interference rejection level - low
Middle : Interference rejection level - moderate
High : Interference rejection level - high
To Next Page
Loading...
