JRC JMA-2353 - 2.10.2 Setting Cursor Display Properties

Chapter 2 OPERATIONS
2.10 MARKER SETTING
2-83
2
INSTRUCTION MANUAL
2.10.2 SETTING CURSORS
This function enables the setting of detail information about cursor display.
 "Cursor" operations
1 Open Marker - Cursor .
"Cursor" menu appears.
 Cursor Length
Sets the length of the cross cursor mark on the radar display.
1 Open Cursor - Cursor Length .
Short : Cuts the cross cursor mark in length.
Long : Makes the cross cursor mark twice as long as when "Short" is selected.
 Cursor Pattern
Selects the type of the cross cursor mark on the radar display.
1 Open Cursor - Cursor Pattern .