Chapter 7 SPECIFICATIONS
7.3 DISPLAY UNIT
7-6
7.3 DISPLAY UNIT
7.3.1 INTEGRATED DISPLAY UNIT (NCD-2237)
(1) Structure Desk Top Integrated Type (LCD Monitor Unit/Keyboard
Unit/Processor Unit Integrated Structure)
Vertical installation only desk top integrated type
(2) Dimensions Height 242mm × Width 278mm × Depth 275mm
(3) Mass Approx. 8kg
(4) Tune Method MANUAL/AUTO (Bar-graph indication)
(5) STC (SEA) MANUAL/AUTO
(6) FTC (RAIN) MANUAL/AUTO
(7) Radar Interference Rejection
Built-in (The effect can be adjusted by three stages.)
(8) Bearing Marker 360° in 5° digit
(9) Heading Line Electronic
(10) Off Center Within 66% of the radius of PPI
Transition of the radar trails is possible during Off Center
mode.
(11) True Motion Unit Built-in
(12) True Motion Reset Position
66% of radius of any range
(13) Radar trail indication
True motion mode: Only true motion trails
Relative motion mode: True motion trails or relative motion trails can be
selected.
Trail time length: 15sec/30sec/1min/2min/3min/6min/10min/15min/
Continuous
Arbitrary trail time length can be displayed at any time.
When changing the motion mode, the trails can be
succeeded.
(14) Variety of Pulse width Short/Middle/Long (depending on range)
(15) Target enhance Range and bearing
(16) Plotting Line: Line type can be selected.
Mark: Mark type can be selected.
200 marks or lines can be used.
(17) Display color
Radar echo Monochromatic
Radar trails Monochromatic, 16 stages
Time trails
Continuous trails
To Next Page
Loading...
