JRC JMA-2353 - 2.7.10 Setting Display Screen Layout

Chapter 2 OPERATIONS
2.7 SOFT KEY OPERATION
2-53
2
INSTRUCTION MANUAL
2.7.10 SETTING DISPLAY SCREEN
Sets the layout of radar screen.
1 Select Display Screen on the soft key menu.
The "Display Screen" soft key display appears.
2 Operate with the soft keys.
Soft key 1: Screen1
The screen changes to the layout set with the menu "Adjust Menu" - "Display
Screen" - "Location Change" - "Screen1".
Soft key 2: Screen2
The screen changes to the layout set with the menu "Adjust Menu" - "Display
Screen" - "Location Change" - "Screen2".
Soft key 3: Not available
Soft key 4: Numerical INFO TT Detail AIS Detail Own AIS INFO
MOB INFO
Each time you press the soft key 4 when "Numerical INFO" is set, the soft key
display toggles in the following order:
"Numerical INFO" → "TT Detail" → "AIS Detail" → "Own AIS INFO"
→ "MOB INFO".
"Display Screen" is colo
r
-inverted.