JRC JMA-2353 - 2.13.9 Setting AIS Filter Range; 2.13.10 TT Target All Clear Function

Chapter 2 OPERATIONS
2.13 SETTING TT/AIS
2-100
2.13.9 SETTING AIS FILTER
Sets the range for AIS filter.
Reference:
For details of AIS filter, refer to "2.7.21 SETTING AIS FILTER".
 Setting AIS Filter
1 Open Target - AIS Filter .
Turn the [MULTI] control to set the range for AIS filter.
The range can be set between 0 and 72.0 NM.
2.13.10 TT Target All Clear
All TT targets currently acquired are cleared.
 TT Target All Clear
1 Open Target - TT Target All Clear .
All targets currently acquired are cleared.