Chapter 2 OPERATIONS
2.7 SOFT KEY OPERATION
2-68
Soft key 4: Off Enter Erase Move Insert
You can use the [ENT] key to create/delete/move the lines.
"Enter": Press the [ENT] key to create a line at the cursor position.
"Erase": Press the [ENT] key to delete a line at the cursor position.
"Move": Use the cursor to select the line to be moved and press the [ENT] key.
Then move the cursor to select the new position and press the [ENT]
key to place the line.
"Insert”: Use the cursor to select the line to be inserted and press the [ENT] key.
Then move the cursor to select the position and press the [ENT] key to
insert the line.
2.7.19 DISPLAYING OWN SHIP'S TRACK
The own ship's track function saves and displays own ship's track.
If navigation equipment is connected, this radar system records latitude/longitude data
sent from the navigation equipment and displays own ship's track. For detail settings of
own track (clearing own tracks, saved data clearing method, etc), see "2.15.1
DISPLAYING WAYPOINT MARKS".
Reference:
Bearing signal input and latitude/longitude data input are required to display own track.
This function is initially set to off. To use this function, set this to on by referring to "■
Soft Key Menu Setting" in "4.10 Control" of the Installation Manual.
1 Select Own Track on the soft key menu.
The "Own Track" soft key display appears.
2 Operate with the soft keys.
Soft key 1: ―― - - - - －－－－
The line type of the own ship's track is changed.
Soft key 2: Not available
"Own Track" is colo
To Next Page
Loading...
Need help?
General
