Chapter 2 OPERATIONS
2.12 CONTROL SETTING
2-87
2
INSTRUCTION MANUAL
2.12 CONTROL SETTING
This function enables the setting of detail information about radar echo.
"Control" operations
1 Open Control from the Main Menu.
"Control" menu appears.
2.12.1 DISPLAYING TRUE/RELATIVE MOTION
Sets the bearing standards for the cursor, TT, AIS and MOB.
Reference:
Bearing signal input is required to display true motion.
Setting Bearing
1 Open Control - Bearing True/Relative .
"Bearing True/Relative" menu appears.
True : True bearing mode is selected.
Relative : Relative bearing mode is selected.
To Next Page
Loading...
Need help?
General
