3ņ67
Creating the automatic acquisition and AIS activation Zone
Procedure 1 Press the [TT Menu] key.
TT Menu opens.
2 Press the [5] key.
Press the [1] key.
Acquisition / activation zone setting menu (AZ)
opens.
3 Press the [3] or [4] key.
The range setting of the acquisition / activation
zone 1 (AZ1) or acquisition / activation zone 2
(AZ2) will be started.
4 Set the starting azimuth and range by
turning the [EBL] dial and
[VRM] dial, and press the [ENT] key.
5 Set the ending azimuth and range by turning the [EBL] dial and
[VRM] dial, and press the [ENT] key.
The acquisition / activation zone will be determined.
To Next Page
Loading...
Need help?
General
