3.5 GENERAL OPERATIONS
3ņ68
3
y
y y
Setting the [AZ] key allocation (Set AZ Key)
A generally used acquisition / activation zone can be turned on / off by simply pressing the [AZ] key.
Procedure 1 Press the [TT Menu] key.
TT Menu opens.
2 Press the [5] key.
Press the [3] key.
Alarm key allocation menu (Set AZ Key) opens.
3 Press the [1] key.
Allocate alarm keys for the acquisition /
activation zone.
On :Pressing the [AZ] key turns on / off
the acquisition / activation zone.
Off :Pressing the [AZ] key does not turn on
the acquisition / activation zone.
Note: If the RADAR Alarm key assignment is set, pressing the [AZ] key turns on / off the AZ Alarm key
at the same time the RADAR Alarm is turned on / off.
To Next Page
Loading...
Need help?
General
