3.5 GENERAL OPERATIONS
3ņ72
3
y
y y
[IV] Make Sector Alarm (Make Sector Alarm)
Sector alarms that can be made are divided into the two types.
Procedure 1 Press [TT MENU] key.
The TT Menu will appear.
2 Press [5] key.
Press [2] key.
The Radar Alarm Menu will appear.
3 Press [3] key.
The Make Sector Alarm Menu will appear.
4 Press numeric key [1] or [2] in
accordance with the Sector Alarm to be
made.
This operation is available only while the unit is
in the transmission mode.
(In the stand-by state, operation is not allowed to go further.)
5 Place the start position of the sector alarm at a desired position by
operating the EBL/VRM dial, and then select 3 ENT.
The start position of the Sector Alarm will be set.
6 Place the end position of the Sector Alarm at a desired position by
operating the EBL/VRM dial, and then select 3 ENT.
The end position of the Sector Alarm will be set.
To Next Page
Loading...
